Audio-Technica PRO 35 Cardioid Condenser Clip-on Instrument Microphone

(No reviews yet) Write a Review
$149.00
Free Shipping
SKU:
AUD-PRO35
Availability:
Ships in 24 Hours
Audio-Technica PRO 35 Cardioid Condenser Clip-on Instrument Microphone

Austin Bazaar is an authorized Audio Technica dealer.

  • Ideal for sax, toms, brass and percussion
  • Excels in high-SPL applications
  • Ideal for active stage performances
  • UniMount clip permits accurate positioning, provides shock resistance and protects element
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

  • Designed for sax, toms, brass and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount clip permits accurate positioning and provides shock resistance while protecting the element. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

    Features

  • Ideal for sax, toms, brass and percussion
  • Excels in high-SPL applications
  • Ideal for active stage performances
  • UniMount clip permits accurate positioning, provides shock resistance and protects element
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Extended frequency response captures subtle nuances of the performance
  • 6 ft. (1.8 m) cable permanently attached between microphone and power module
  • Element: Fixed-charge back plate, permanently polarized condenser
    Polar pattern: Cardioid
    Frequency response: 50-15,000 Hz
    Low frequency roll-off: 80 Hz, 18 dB/octave
    Open circuit sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
    Impedance: 250 ohms
    Maximum input sound level: 145 dB SPL, 1 kHz at 1% T.H.D.
    Dynamic range (typical): 115 dB, 1 kHz at Max SPL
    Signal-to-noise ratio: 64 dB, 1 kHz at 1 Pa
    Phantom power requirements: 11-52V DC, 2 ma typical
    Switch: Flat, roll-off
    Weight (microphone): 0.3 oz. (8 g)
    Weight (power module): 2.9 (81 g)
    Dimensions (microphone): 0.98 in. (25 mm) long, 0.4 in. (10.2 mm) diameter
    Dimensions (power module): 3.66 in. (92.9 mm) long, 0.74 in. (18.9 mm) diameter
    Output connector (power module): Integral 3-pin XLRM-type
    Cable: 6 ft. (1.8 m) long (permanently attached to microphone), 0.10 in. (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
    Accessories furnished: AT8418 UniMount microphone instrument mount; AT8538 power module; soft protective pouch
    Audio-Technica case style: M12

    CALIFORNIA PROPOSITION 65 WARNING: Cancer and Reproductive Harm