Yamaha EMX7 Powered Mixer

(No reviews yet) Write a Review
$789.99
Yamaha EMX7 Powered Mixer

Austin Bazaar is an authorized Yamaha dealer.

  • Designed specifically for musicians, performers, or public speakers who put a premium on sound quality and convenient operation
  • Despite their compact construction, only speakers and a microphone are required to configure a fully functioning, extremely portable, and reliable sound system
  • Built-in high-efficiency power amplifier of 2 x 710W
  • Equipped with four mono input channels and four mono/stereo input channels, allowing up to 8 microphones and line-level devices such as keyboards and portable playback device to be connected to each channel
  • Equipped with 2 AUX SEND connections for a monitoring system or external effect devices, REC OUT unbalanced RCA pin output jacks to connect an external recorder, and STEREO OUT TRS phone jacks to output the mixed stereo signal

  • The new EMX7 and EMX5 were designed specifically for musicians, performers, or public speakers who put a premium on sound quality and convenient operation, and are ready to take their sound reinforcement to the next level. Despite their compact construction, only speakers and a microphone are required to configure a fully functioning, extremely portable, and reliable sound system with all the tools you need to mix, process, and deliver your audio just the way you want, anywhere you want.

    Features
  • Powerful & High Efficiency Class-D Amplifier
  • Robust But Extremely Portable Design
  • Easy Setup, Easy Operation
  • Complete Range of Input & Output Channels
  • Speaker Processor and Preset (EMX7 only)
  • Onboard Feedback Suppressor
  • 3-band Equalizer Control
  • Flex 9 Graphic Equalizer (EMX7 only)
  • 1-Knob Master EQ (EMX5 only)
  • 1-knob COMP
  • Rack-Mounting
  • Comprehensive, Professional Effects and Signal Processing
  • Flexible Speaker Connectivity
  • Internal Universal Power Supply
  • Outline: EMX7
    I/O: Inputs: TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
    : Phantom power: +48 V
    : Outputs: SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
    : Control and others: FOOT SWITCH : Effect Mute on/off
    Bus: Stereo: 1, AUX: 2 (Including FX)
    Input Channel Function: PAD: 30 dB (CH1-4)
    : Hi-Z: Supported (CH4)
    : HPF: 80 Hz, -12 dB/oct. (CH1-3)
    : COMP: 1-knob COMP (CH1-4)
    : EQ HIGH: 10 kHz +15 dB / -15 dB (Shelving)
    : EQ MID: 2.5 kHz +15 dB / -15 dB (Peaking)
    : EQ LOW: 100 Hz +15 dB / -15 dB (Shelving)
    On-board processors: DSP: SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor
    On-board amplifiers: Maximum output power @4ohms: 1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W
    : Maximum output power @8ohms: 1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W
    Level Meter: 2 × 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK)
    General specifications: EMX7
    Frequency response: Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
    Total harmonic distortion: Input to SPEAKERS: MIC/LINE =LINE (CH1-4): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH1-4): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
    Hum & noise level: Equivalent input noise: -117 dBu (Noise is measured with A-weighting filter)
    : Residual output noise: Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
    Crosstalk: -85 dB (1 kHz, Measured with 1 kHz band pass filter)
    Protection circuit: Load protection: DC-fault
    : Amplifier protection: Over heat protection, Over current protection, Integral power protection
    : Power supply protection: Over heat protection, Over current protection
    Power requirements: AC 100-240V, 50Hz/60Hz
    Power consumption: 45 W (Idle) / 250 W (1/8 Power)
    Dimensions: W: 465 mm (18 5/16")
    : H: 308 mm (12 1/8")
    : D: 325 mm (12 13/16")
    Net weight: 9.5 kg (20.9 lbs)
    Accessories: Owner's Manual, Technical Specifications, AC power cord (2.5 m)
    Options: Foot switch: FC5, Rack-mount brackets: RK-EMX7
    Others: Operating Temperature : 0 to +40?

    CALIFORNIA PROPOSITION 65 WARNING: Cancer and Reproductive Harm