- Perfect for home studio recording projects
- Includes shock mount and microphone clip
- 1 GXL2200 Cardioid Condenser Microphone
- 1 GXL1200 Cardioid Condenser Microphone
- 1 EPF15A Pop Filter
The GXL2200 condenser microphone consists of a thin conductive membrane stretched very close to a stationary plate. High voltage is applied between the membrane and the plate. As the membrane vibrates, electrons move. These moving electrons are sensed as voltage. This voltage can be strengthened (but not necessarily increased) by silicon. The GXL2200 is inspired cosmetically, mechanically, and electrically by early generations of European masters. Features include (but are not limited to) an internal hi-pass filter. Elastic shock mount and protective pouch are included. P48 (48V) phantom power is required.
The GXL1200 enables point-source transduction, field-effect detection, and pure high voltage. Capture your instrumentation with exacting detail. Proximity effect is inversely proportional to distance. P48 (48V) phantom power is required.
Your microphone is begging you for the CAD EPF-15A 6-Inch Flexible Pop Filter. Would you take your brand new microphone into the shower with you? Didn't think so! But every time your singer starts belting out the chorus, they're bathing that mic in a spray of moisture. What's more, when they sing a word that starts with "p" or "b," the VU meters go ballistic! Here's the solution -- the CAD Pop Filter. The washable nylon mesh screen gently breaks up that explosive rush of air while allowing high frequencies through and keeping moisture out. The flexible gooseneck holder and swivel mount make it easy to put the Pop Filter exactly where you need it!
Operating Principle: Externally-biased condenser
Polar Pattern: Cardioid
Frequency Response: 30Hz to 20KHz
Sensitivity: -36dBV (16mV) @ 1 Pa
Impedance: 75 ohms
Max SPL: 130dB, 1% THD
Self Noise: 20dBA
Power Requirements: P48, 3mA
