• Tilt Back Handle Bar
• 1/4" and Neutrik Speakon Jacks
• Variable HF "L-Pad"
• Baltic Birch Plywood
• 3" Dolly-Style Casters

This is the speaker cabinet for the bass player who demands the ultimate in a single, compact cabinet setup. The SVT-410HLF delivers devastating low-end bass, all the way down to 28Hz, thanks to four 10" speakers working together to move a tremendous amount of air. The SVT-410HLF actually moves 10% more air than two 18-inch speakers, and 25% more than three 15-inch speakers! And those leviathans simply can't respond to transient peaks as quickly as four tens can.

The SVT-410HLF also delivers superb top-end, thanks to its 1" horn driver, strategically crossed over at 4kHz. This is a favorite enclosure for such artists as Meshell Ndegeocello, John McVie of Fleetwood Mac, and Ricky Skaggs' bass player, Mark Fain.

The Ampeg SVT-410HLF is the supreme speaker enclosure for the multi-string bass player seeking both superior power handling and true high-fidelity performance.

LF Drivers: 4 x 10"
Voice Coil: 2"
Magnet Weight (each): 30 oz
HF Drivers: Horn/Driver
Voice Coil: 1"
Magnet Weight (each): 8 oz
RMS Power Handling: 500-Watts
Frequency Response (-3dB): 48Hz-18kHz
Usable Low Frequency (-10dB): 28Hz
Nominal Impedance: 4-Ohms
Sensitivity: 98dB
Maximum SPL: 125dB
Dimensions (W x H x D inches): 24 x 30 x 19
Shipping Weight: 110 Pounds
Handling Weight: 85 Pounds
Footswitches:
GVT-FS1: channel switching / gain boost (included)
GVT-FS2: 2-button footswitch for reverb and effects loop on/off (sold separately)
Dimensions (H x W x D inches excluding handle approx.): 19.5 x 24.0 x 11.0
Handling weight (approx.): 52.2 lbs / 23.7 kg
Handling weight (approx.): 52.2 lbs / 23.7 kg