• Ideal multitrack recording "workhorse" thanks to very low self noise
• Cardioid polar pattern for multiplicity of applications such as recording instruments, drums, and vocals
• Exceptionally smooth frequency response
• Comes with universal shock mount and hardshell road-case
• Highly versatile microphone that can be used even for extremely loud instruments

One of the basic rules of recording is that the quality of the recorded signal is determined by the weakest link in the signal chain. Today, any microphone needs to match the high quality of 24-bit recording media.

Therefore, one of the most important requirements for the C 2000 B was high sensitivity. This allows you to lay clean, noise-free tracks with no risk of noise levels from many individual tracks combining in the mix. Its high SPL capability makes the C 2000 B a highly versatile microphone that can be used even for extremely loud instruments.

The C 2000 B will give perfect results for demo recordings, in the rehearsal room, as well as in the best recording studios.

Polar pattern: cardioid
Frequency range: 30 to 20,000 Hz
Sensitivity: 20 mV/Pa (-34 dBV)
Max. SPL: 140/150 dB (k=0,5%)
Equivalent noise level (IEC 60268-4): 30 dB
Equivalent noise level: 20 dB-A
Signal/noise ratio (A-weighted): 74 dB
Preattenuation pad: 10 dB, switchable
Bass filter: 6 dB/octave below 500 Hz
Impedance: 200 ohms
Recommended load impedance: >1000 ohms
Supply voltage: 9 to 52 V phantom power to DIN 45596
Powering: <2 mA
Connector: 3-pin XLR
Finish: silver gray
Net weight: 325 g / 11.5 oz.
Shipping weight: 950 g / 2 lbs.
Patent(s): Electrode support for condenser transducer (Patent no. AT 392.182, DE 4.021.661); Electrostatic transducer (Patent no. AT 411.513, US 6,510,231)